Mine Deployment Instructions for Boom-Plex Oscillating Ordnance Mines
Boom-Plex puts the "boom" in BOOM!
Congratulations on purchasing or otherwise acquiring a full
set (24 parts) of Boom-Plex Oscillating Ordnance Explosive
Mines (BOOMS).
Instructions for use:
1. Carefully open packing crate and ensure no mines have shifted during transport. Opening packing crate recklessly could lead to inadvertent death or injury.
2. Remove each individual BOOM and carefully place on a
cool, dry, flat surface. Do not place BOOMS too close to one
another, as this could cause trigger fail-safes to
catastrophically fail. Catastrophic trigger fail-safe failure
could lead to inadvertent death or injury.
3. Once unpacking is finished, plant BOOMS one at a time
on your minefield. Boom-Plex recommends keeping close
track of where you place your new mines. Accidental mine
rediscovery could lead to inadvertent death or injury.
4. Continue to place mines at regular intervals until
minefield is full. Once minefield is full, placement of
additional mines is not recommended. Over-mining could
lead to inadvertent death or injury.
5. Once mines are placed. do not have any further
interaction with mines. Interaction of any kind with mines
could lead to inadvertent death or injury.
6. And as always, please aim away from face. Failure to aim away from face could lead to inadvertent death or injury.
Thank you again for buying Boom-Plex Oscillating
Ordnance Mines!
- The Boom-Plex Team
Location[]
This journal is located in Deradune on the Savage Coast at -7593,-181